Sony MZ-R701 User Manual

Page 19

Note

Track marks may be copied incorrectly:
• when you record from some CD players or multi disc players using digital

(optical) input.

• when the source is in shuffle or program play mode while recording using

digital (optical) input. In this case, play the source in normal play mode.

• when programs with audio that is digitally broadcast (e.g., digital TV) are

recorded through the digital (optical) input.

Recorded
track numbers

Marked (copied)
automatically
• at the same positions as

the source (when the
sound source is a CD or
an MD).

• after more than 2

seconds of blank or low-
level segment (with a
sound source other than
CD or MD).

• when the recorder is

paused during synchro-
recording (the recorder
pauses automatically
when it encounters a
section with no audio
signal for 3 seconds or
more).

You can erase
unnecessary marks after
recording. (“Erasing a
track mark”, page 43).

Marked automatically
• after more than 2

seconds of blank or
low-level segment.

• when the recorder is

paused while
recording.

You can erase
unnecessary marks
after recording
(“Erasing a track
mark”, page 43).

Recorded
sound level

Same as the source.
Can also be adjusted
manually (Digital REC
level control) (“Adjusting
the recording level
manually (Manual
recording)”, page 28).

Difference

Digital (optical) input

Analog (line) input