Sony MZ-R701 - Manual (Page 13)

13
2
Record an MD.
1 Press and slide REC to the
right.
REC indication lights up in
the display and recording
starts. 2 Play the source you want to
record.
To stop recording, press x.
After you press x, the recorder will automatically turn off after:
— about 5 minutes when using AC power adaptor.
— about 10 seconds when using batteries.
Notes
• “Data Save” or “TOC Edit” flashes while data of the recording (the track’s
start and end points, etc.) is being recorded. Do not move or jog the recorder
or disconnect the power source while the indication is flashing in the display.
• The lid does not open until “TOC Edit” disappears in the display.
REC
x
To Press
Record from the end of the
previous recording
1)
END SEARCH and then press and
slide REC.
Record partway through the
previous recording
1)
N, > or . to find the start
point of recording and press x to
stop. Then press and slide REC.
Pause X 2)
Press X again to resume recording.