When using with a Macintosh computer, it is necessary to set the region the first time. Perform
the setting as explained below. After setting the region, steps 3-4 are unnecessary when used
after that.

1. Make a USB connection between the camera and a Macintosh computer.

When you connect the camera and your computer, [PMBPORTABLE] appears on the
desktop.
Click [×] to close any unnecessary drives.

2. Click [PMBP_Mac] in the [PMBPORTABLE] folder.

The Region Selection screen appears.

3. Select the appropriate [Region] and [Country/Area], and then click [OK].

The User Agreement screen appears.

4. Read the agreement carefully. If you accept the terms of the agreement, click [I Agree].

“PMB Portable” starts up.

Notes

Set [LUN Setting] in [Main Settings] to [Multi].
Always connect to a network when using “PMB Portable”.
When uploading images over the Internet, the cache may remain in the computer being
used depending on the service provider. This is also true when this camera is used for this
purpose.
When a bug occurs in “PMB Portable” or you delete “PMB Portable” by mistake, you can
repair “PMB Portable” by downloading the PMB Portable installer from the website.

167