Sony DSC-H70 User Manual

Page 106

Receiving images using TransferJet

1. Press the

(Playback) button to switch to playback mode.

2. Closely align the (TransferJet) marks on the camera and sending device to receive

images.
A notification sound is emitted when connection is made.

Tips for sending and receiving data successfully

Closely align the

(TransferJet) mark on the camera and other device.

The transfer rate and range differ depending on the angle at which the

(TransferJet)

marks are aligned.
It may be necessary to alter the position/angle of the camera until communication can be
obtained.
Sending and receiving data is easier if the

(TransferJet) marks are aligned with both

cameras parallel to each other as shown in the figure.

Notes

Only images that can be played back on the camera can be sent or received.
If an Image Database File error occurs during saving, a Recover Image Database File
screen will appear.
Play images that cannot be registered in the Image Database File using [Folder view (Still)].

Using TransferJet-compatible devices (sold separately)

Using TransferJet-compatible devices (sold separately) allows you to transfer images to a PC
and can broaden your enjoyment of transferring data.
For details, see the operating instructions supplied with your TransferJet-compatible device.

Note the following points when using TransferJet-compatible devices.

Before use, set the camera to playback mode.
If no image is displayed, press MENU

(Settings)

(Main Settings)

[LUN

Setting]

[Single].

While connected, data cannot be written to or deleted from the camera.
Do not disconnect while importing images to “PMB”.

Related Topic

TransferJet
TransferJet standard

106