Sony KDF-E60A20 - Manual (Page 84)

Other Information
82
KDF-E55/60A20
2-593-962-11(3)
Audio
Channels
Problem Possible Remedies
Good picture, no sound
❏
Press MUTING so that Muting disappears from the screen (see page 42).
❏
Make sure the Speaker option is set to On in the Audio menu (see page 61).
❏
Make sure the MTS option is set to Stereo or Mono (see page 61).
Audio noise ❏ Communication problems may occur if infrared communication equipment (e.g.,
infrared cordless headphones) is used near the TV. Please use headphones other
than infrared cordless headphones. Also, if you use infrared communication
equipment other than infrared cordless headphones, move the infrared transceiver
away from the TV until the noise is eliminated, or move the transmitter and
receiver of the infrared communication equipment closer together.
Cannot gain enough volume
when using a cable box
❏
Increase the volume of the cable box using the cable box’s remote control. Then
press
FUNCTION once, and the TV indicator lights up and adjust the TV’s
volume.
Sound seems weak or
insufficient
❏
The TV’s audio might be set to Auto SAP or Mono , when it might be better set to
Stereo . In the Audio menu (see page 61), set the MTS setting to Stereo . If
already set to Stereo , switch to Mono (which may reduce background noise
during weak stereo broadcasts).
Cannot raise the volume on
external speakers
❏
If the Speaker option is set to Off and the Audio Out option is set to Fixed (in
order to output the sound to your audio system) use your audio receiver to adjust
the sound (see page 61). Or, to use the TV remote control, set the
Audio Out
option to Variable .
❏ To turn on the TV speakers, set the Speaker option to On (see page 61).
Problem Possible Remedies
Cannot receive upper channels
(UHF) when using an antenna
❏
Press ANT to select the VHF/UHF input (see page 42).
❏
Use Auto Program in the Channel menu to add receivable channels that are not
presently in the TV’s memory (see page 64).
Cannot receive any channels
when using cable TV
❏
Use Auto Program in the Channel menu to add receivable channels that are not
presently in the TV’s memory (see page 64).
❏ Press ANT to select the CABLE input (see page 42).
Cannot receive or select
channels ❏ Use Auto Program in the Channel menu to add receivable TV channels that are
not presently in TV memory (see page 64).
Some digital cable channels are
not being displayed ❏ Certain cable companies have limitations on the broadcast of digital cable
channels. Check with your cable company for more information.
❏
The digital cable channel may be set to Hidden in the Channel settings menu (see
page 64).