Sony MHC-771 - Manual (Page 15)

EN
Chapter 4: the Tape Player 14
To
Stop play
Pause
Resume
play after
pause
Fast forward
Rewind
Remove the
cassette
Playing a Tape
You can use TYPE I (normal), TYPE II
(CrO
2 ) and TYPE IV (metal) tapes. When
you insert a tape, the deck detects the tape
type automatically.
1
Press § EJECT to open tape
compartment.
Insert a recorded tape in deck A or B
with the tape side down and the side
you want to play facing forward. Push
to close the compartment. The tape will
start playing from the front side.
2
Press · (to play the front side) or ª
(to play the reverse side).
The tape starts playing.
* 1 The deck stops automatically after
repeating the sequence five times.
* 2 See “To play both decks in succession
(relay play)”.
* Remote
To control with the remote
1 Press DECK A
or DECK B to
play the front side and press DECK
A
or DECK B again to play the
reverse.
2 Press the desired operation button.
To play both decks in succession
(relay play)
Relay play always follows the following
sequence. When the reverse side of the tape
in deck B finishes playing, the following
sequence continues four more times.
Deck A Deck A
(Front side) (Reverse side)
Deck B Deck B
(Reverse side) (Front side)
1 Press § EJECT and insert recorded
tapes in both decks.
2 Press DIRECTION repeatedly until
“RELAY” appears in the display.
3 Press ª or · on either deck.
To stop relay play, press π.
To cancel relay play
Press DIRECTION repeatedly until “
A”
or “ ß” appears in the display.
When listening to a tape recorded with the
Dolby* B-type noise reduction system
Press DOLBY NR button so that “DOLBY
NR B” appears in the display.
The setting affects both decks. Dolby noise
reduction system reduces tape hiss noise in
low-level high-frequency signals.
* Dolby noise reduction manufactured
under license from Dolby Laboratories
Licensing Corporation.
“DOLBY” and the double-D symbol a
are trademarks of Dolby Laboratories
Licensing Corporation.
One Touch Play feature
Press
· or ª when the power is off.
You can listen to the tape without pressing
any other buttons when a tape is in the
deck. When a tape is not in the deck, the
system will just turn on.
Automatic Source Selection
If you press
· or ª (or DECK A or
DECK B on the remote) while you are
listening to other sound source, the tape
deck is selected and the play starts
automatically.
Playing a Tape
Recording a CD
Recording a CD: Selecting
Tape Length
Automatically (tape
select edit)
Recording a CD: Specifying
Tape Length (time edit)
Recording a CD: Specifying
Track Order (program
edit)
Recording From the Radio
Recording From Another
Tape (dubbing)
Chapter 4:
the Tape
Player
n
n
n
N
To play
One side of the tape
Both sides* 1
Both decks in
succession*
2
Press DIRECTION to
select
A
ß
RELAY
Press
π ( *)
∏ ( *) (deck B only)
PAUSE
∏ ( *) (deck B only)
PAUSE , ª or · (DECK
A or DECK B *)
‚ ( *) for front side
º ( *) for reverse side
º ( *) for front side
‚ ( *) for reverse side
§ EJECT
POWER nON
1
DIRECTION DOLBY NR
2
π
1
2
º/‚ º/‚
π
PAUSE ∏