Sony MHC-771 - Manual (Page 11)

EN
Chapter 2: the CD Player 10
Playing tracks in a clip
(CLIP PLAY)
CLIP indicator(s) light in the display to let
you know when clips are stored for a disc.
1
Press CLIP PLAY.
2
Press CLIP button (A, B or C).
“CLIP PLAY” appears in the display
and the selected CLIP indicator lights.
The player starts playing tracks from the
selected clip.
To cancel clip play
Press
π on the CD player.
Notes
•In 1 DISC mode, the tracks stored for the
selected disc are played back once, then
clip play is released.
•In ALL DISCS mode, all the tracks stored
for the currently loaded discs are played
back once, then clip play is released.
•You cannot start CLIP play if
“PROGRAM” is displayed.
Erasing Tracks from a Clip
Erasing one track
1 Press CLIP PLAY.
2 Press CLIP button (A, B or C) for the clip
containing the track you want to erase.
3 Use the JOG dial to select the track you
want to erase.
4 Press CLIP ERASE.
“ERASE A - C” and “TRACK” appear
alternately in the display.
5 Press CLIP button (A, B or C) you
pressed on step 2.
“ERASE CLIP” appears in the display.
Erasing all the tracks in a CLIP A (B or
C)
1 In stop mode, press CLIP ERASE.
“ERASE A - C” and “ALL A-C” appear
alternately in the display.
2 Press CLIP button (A, B or C) to specify
the clip you want to erase. “PUSH A (B
or C)” appears in the display.
3 Press CLIP button you pressed on step 2
again. “ERASE ALL” appears in the
display and CLIP indicator disappears.
Playing Tracks:
Repeating a
Specified Portion
(loop play)
You can use the loop function to record
from a CD to a tape with the sampler play.
Use the buttons both on the unit and
remote to do this operation.
EXAMPLE
Original song:
“Hey, come on everybody!”
When you use the loop function:
“Hey, come come come come come on
everybody!”
Grouping Tracks
(music clip)
The music clip function is an easy way to
produce up to three groups of tracks from
your CDs. For example, you could store
tracks for the morning in CLIP A, tracks to
play for your friends in CLIP B, and tracks
for relaxing in CLIP C.
Once you store one or more tracks in a
music clip(s), the player recalls those tracks
whenever you play the respective disc.
Storing Tracks in a Clip
1
Press FUNCTION repeatedly until “CD”
appears in the display.
2
Play the track you want to store, or (in
stop mode) use the JOG dial to select the
track you want.
3
Press CLIP button (A, B or C).
“CLIP FILE” appears and the selected
CLIP indicator (A, B or C) appears in the
display. Normal playback continues.
4
Repeat steps 2 and 3 to store other tracks
into the same or a different clip.
If the memory becomes full
You can store tracks from up to ten
different CDs (one or more tracks per CD)
to each clip data.
The clip data for the oldest clip is erased to
make room for a new clip.
Note
•Only tracks numbered 1 – 20 can be
stored in music clips so you cannot store
tracks numbered 21 or more.
•In stop mode, you cannot store tracks if
“SHUFFLE” or “PROGRAM” is
displayed.
125 63 250 500 1k 2k 4k 8k 16k(Hz)
DOLBY NR OFF
CD
ALL A CLIP DISC S
3 VOLUME
POWER nON
3
2
1
POWER nON
2
1
π
POWER nON
CLIP ERASE
CLIP PLAY
CLIP A-C
JOG dial
125 63 250 500 1k 2k 4k 8k 16k(Hz)
DOLBY NR OFF
CD
ALL A CLIP DISC
1 2 3 4 5
6 7 8 VOLUME
POWER nON
2
4
1
DISC SKIP EX-CHANGE
3,5