Sony DPF-WA700 - Manual (Page 15)

Tabl
e of
C
o
n
tent
s
Let
’s
U
s
e
E
njo
y
ing
Mo
re
T
ro
u
b
les
hoo
ti
ng
In
dex
15 GB
3
Select the time zone.
1 Drag with your finger to scroll through the list
and tap to select the time zone.
2 Tap [Next].
A message for Wi-Fi settings appears.
3 Tap [Next] when you wish to set up the initial
settings for Wi-Fi connection.
The Wi-Fi Settings display appears.
If you wish to connect a Wi-Fi network later, tap
[Skip].
• For how to make the Wi-Fi settings, see “Changing the Settings” (page 56).
4
Set up the wireless LAN.
Select the setting method for the wireless device.
A Select this if your access point supports WPS and has a WPS button.
tGo to “A WPS Push-Button Configuration method” (page 16).
B Select this if your access point supports WPS but does not have a WPS button.
tGo to “B WPS PIN Method” (page 16).
C Select this if your access point does not support WPS.
Tap [Search] so that the connectable access point list is shown. Select an access point to
which you want to connect from this list and enter SSID (network name) and passphrase
(security key), following the on-screen instructions.
t Go to “C Search Wi-Fi Networks” (page 17).
• WPS (Wi-Fi Protected Setup) is a standard for connecting with Wi-Fi protected by security
easily. Before setting Wi-Fi, check if your access point confirms with the WPS standard
where the WPS button is, and how to use the WPS button.
• The WPS button may be named differently, depending on the access point.
• Refer also to the operating instructions for the wireless LAN router (access point). The
Network name (SSID) and Password (WEP key or WPA key) are printed on the
side or rear of the access point.
If they are not clear, contact the manufacturer of the access point.
Continued r