Sony CMT-MX700Ni - Manual (Page 30)

30 GB
Listening to the radio
You can tune in FM stations or DAB/DAB+
stations (CMT-MX750Ni only). Presetting stations
in advance allows you to recall them by number.
Note that the reception of RDS services is only
available for European models and the DAB/
DAB+ tuning is only available for CMT-
MX750Ni.
Tuning in a radio station
Before tuning in DAB/DAB+ stations, make sure
that the DAB Initial Scan has been performed and
a service component list has been stored on the
system.
1
Press TUNER repeatedly to select
“FM” or “DAB.”
2
Perform tuning.
For automatic tuning:
Press TUNING MODE repeatedly until
“AUTO” lights up, then press +/–. Scanning
stops automatically when a station is tuned
in, and “TUNED” and “ST”(for stereo
programs only) light up on the display.
If “TUNED” does not light up and scanning
for an FM station does not stop, press x to
stop scanning, then perform manual tuning.
For manual tuning (FM band only):
Press TUNING MODE repeatedly until
“AUTO” and “PRESET” go out, then press
+/– repeatedly to tune in the desired station.
For preset tuning:
Press TUNING MODE repeatedly until
“PRESET” lights up, then press +/–
repeatedly to select the desired preset
number. For details on presetting stations, see
“Presetting radio stations” (page 31).
When you tune in an FM station that provides
RDS services or a DAB/DAB+ station, the
service name or station name appears on the
display.