Sony HT-SS380 - Manual (Page 16)

16 US
2
Fasten the screws to the wall.
The screws should protrude
8 mm to 10 mm (11/32 in to
13/32 in).
For the center speaker
For the front speakers and
surround speakers
3
Hang the speakers on the
screws.
Notes
• Use screws that are suitable for the wall material
and strength. As a plaster board wall is especially
fragile, attach the screws securely to a beam and
fasten them to the wall. Install the speakers on a
vertical and flat wall where reinforcement is
applied.
• Contact a screw shop or installer regarding the
wall material or screws to be used.
• Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
8 mm to 10 mm
(11/32 in to
13/32 in)
210 mm
(8 3/8 in)
8 mm to 10 mm
(11/32 in to
13/32 in)
5 mm (7/32 in)
10 mm
(13/32 in)
Rear of the speaker