Connecting a projector – Sony VGN-SZ140 User Manual
Page 89
89
Using Peripheral Devices
Connecting a Projector
You can connect a projector (for example, the Sony LCD projector) directly to your computer or via the optional docking
station.
To connect a projector
1
Connect the power cord (1) of the projector into an AC outlet.
2
Plug the RGB signal cable (2) into the monitor (VGA) port (3)
a
on the computer or on the docking station.
3
Plug the audio cable (4) (not supplied) into the headphones jack (5)
i
.
4
Plug the RGB signal cable and the audio cable into the jack and port on the projector (6).
This manual is related to the following products: