Recording in mirror mode – Sony HDR-XR160 User Manual
Page 41
1
Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
US
Using the Video Light (HDR-CX360/
CX360V/PJ30/PJ30V)
You can use the Video Light depending on
the surrounding condition. Keep a distance
of about 0.3 m to 1.5 m (1 foot to 5 feet)
between the camcorder and the subject
when you use the video light.
Each time you press the LIGHT button, the
indicator changes as follows.
No indicator (Off)
(Auto)
(On) ...
Press the LIGHT button repeatedly to
cancel the Video Light.
Notes
The Video Light generates strong light. Do not
use the Video Light directly in front of the eyes
at close range.
The battery drains quickly while using the
Video Light.
Tips
You can adjust the brightness of the Video Light
using the [Light Bright] menu (p. 86).
When the Video Light is set to
(Auto),
the video light may turn on and off repeatedly.
In such a case, press LIGHT repeatedly to select
(On).
When you take photos, the video light is turned
off and acts as the flash.
Recording in mirror mode
Open the LCD panel 90 degrees to the
camcorder (), then rotate it 180 degrees
to the lens side ().
Tips
A mirror-image of the subject appears on the
LCD screen, but the image will be normal when
recorded.
LED Video Light