Sony PCG-GR290 User Manual
Page 59

Troubleshooting Your Notebook
59
7
Select Yes, and then press Enter. The notebook restarts.
My notebook starts, but the message “Operating system not found” appears and
Windows does not start.
❑
If you have connected an external, optional floppy disk drive, make sure
there is no floppy disk in the floppy disk drive (non-bootable).
❑
If a non-bootable floppy disk is in a connected floppy disk drive, follow
these steps:
1
Turn off the notebook, and then remove the floppy disk.
2
Restart the notebook and confirm that Windows starts properly.
❑
If Windows still does not start, follow the steps below to start the BIOS:
1
Turn off the notebook.
2
Remove any peripheral devices connected to the notebook.
3
Turn the notebook on again.
4
Press the F2 key when the Sony logo appears. The BIOS setup menu
screen appears.
5
Press the arrow keys to select the Exit menu.
6
Press the arrow keys to select “Get Default Values” and then press
Enter. The message “Load default configuration now?” appears.
7
Select Yes, and then press Enter.
8
Use the directional arrow keys to select “Exit” (Save Changes), and then
press Enter. The message “Save configuration changes and exit now?”
appears.
9
Select Yes, and then press Enter. The notebook restarts.
✍
If this occurs on a regular basis, contact Sony PC Support
(http://www.sony.com/pcsupport/).