Sony MZ-R37 - Manual (Page 21)

21
Labeling recordings
You can name tracks during playback,
discs during stop, and both during
recording. Each name can be as long as
200 letters.
For each disc, you can enter up to 1700
alphanumeric letters during playback or
stop, and 500 alphanumeric letters during
one recording.
Labeling a disc during stop
1
Insert a disc.
To label a disc that is already in the
recorder, press
p to stop.
2
Keep pressing EDIT for 2 seconds or
longer.
“
” “Name” flashes in the
display.
T MARK•CANCEL
VOL +/–
DISPLAY•EDIT•INSERT
MODE•DELETE
p•CHARGE
P•CAPS
1
Keep pressing EDIT for 2 seconds or
longer while playing the track you
want to move.
“
” “ Name” flashes in the
display and the recorder plays the
selected track repeatedly.
2
Press = or + ((•+ on the
remote control) repeatedly until
“
” “ Move” flashes in the
display.
3
Press ENTER.
For example above, “003 n” and
“n 003” appear alternately in the
display.
4
Press = or + ((•+ on the
remote control) repeatedly to select
the destination track number.
For example above, “003 n” and
“n 002” appear alternately in the
display.
To cancel moving, press
p or
CANCEL.
5
Press ENTER.
The track moves to the selected
destination track.
(•ENTER
VOL•
POSITION
+/–
EDIT•INSERT
DELETE
T MARK•CANCEL
p•ENTER
P•CAPS
= (•+
= +
T MARK•
CANCEL
EDIT•
INSERT
p•ENTER
=
(•+
continued