Sony PCG-NV290 - Manual (Page 56)

VAIO Computer Quick Start
56
1 Connect the AC adapter to the computer. See “Connecting the AC adapter”
for more information.
2 Insert the disc into the optical drive. See “Inserting and Ejecting CDs or
DVDs” for more information.
3 Click Start, All Programs, and select the program you want to use from the
submenu.
❑ For directions on how to use SonicStage and Drag’n Drop CD/DVD
software, see the VAIO Multimedia Software Guide. To open this guide,
follow these steps:
1 Click Start and Help and Support.
2 Click VAIO Multimedia. The VAIO Multimedia Software Guide
appears.
4 Once you finish copying files to a CD-R that is readable in a CD-ROM
drive, click Finish to complete the writing process before you eject the disc
from the optical drive.
Frequently asked questions
How do I maintain CDs and DVDs?
❑ Avoid touching the surface of the disc with your fingers. Fingerprints and
dust on the surface of the disc may cause reading errors.
❑ To clean the disc, hold the edge of the disc, and use a soft cloth to wipe the
surface from the center out. If the disc is badly soiled, moisten a soft cloth
with water, wring it out well, and use it to wipe the surface of the disc from
the center out. Wipe off any remaining moisture with a dry, soft cloth.
❑ Do not clean the disc with solvents (such as benzine, thinner, commercially
available cleaners, or anti-static spray), which may damage the disc.
❑ Do not drop or bend the disc.
✍
You can also reference the online help guides supplied with the program.
Do not strike or shake the computer while copying files to a disc.