Sony PCG-NV290 - Manual (Page 123)

Using i.LINK Digital-Video Recorders
123
Disconnecting the i.LINK digital video recorder
You can disconnect the i.LINK digital video recorder when the computer is on or
off. Simply unplug the i.LINK cable from the i.LINK / DC IN/OUT port
on
the computer.
Using a digital video camera recorder
Your computer comes with preinstalled driver software that is compatible with
most Sony digital video camera recorders. If you purchased a camera that comes
with its own driver software, install these drivers before you use the camera.
To view images
You can view the images captured by your digital video camera recorder three
different ways. Select one set of instructions from the following list:
❑ If your digital video camera recorder is compatible with the preinstalled
programs, the Digital Video Device window appears when you connect the
Connecting an i.LINK Digital Video Camera Recorder
✍
See the guide that came with your digital video camera recorder for more information
on its installation and use.
✍
Disconnecting the DV device when the computer is in a power saving mode (Standby
or Hibernate) may cause the computer to malfunction.
i.LINK
port
Digital video
camera recorder
i.LINK cable
(not supplied)