Sony NEX-VG20 - Manual (Page 49)

Table of C
on
ten
ts
Sear
ch image
Inde
x
US
[Exposure] manual ( )
When using [Exposure], [Spot Meter], etc.,
any of the IRIS, Shutter Speed, and Gain
(ISO) which are currently set to auto ( ) is
switched to manual ( ).
The brightness is adjusted based on the
value set in [Exposure], [Spot Meter], etc.
 Set [Exposure] to manual.
 Press IRIS  to set the mode to
manual ( next to the setting
value disappears).
You can adjust the setting value using
the MANUAL dial when the setting
value is highlighted with no shown
next to it.
 Rotate the MANUAL dial  to set
the aperture value.
The values of Shutter Speed and Gain
(ISO) change, according to the value
set in [Exposure], [Spot Meter], etc.
Full manual
You can use full manual mode when you set
all of IRIS, Shutter Speed and Gain (ISO)
to manual.
The relationship between the three
modes
 [Exposure], [Spot Meter] set to manual/
auto.
 When all of IRIS, Shutter Speed, Gain
(ISO) is set to manual.
 At least, one of  is set to [Auto].
Tips
IRIS, Shutter Speed and Gain (ISO) will all be
set to automatic adjustment when PROGRAM
AE is pressed.
Among IRIS, Shutter Speed and Gain (ISO),
only the item(s) which is set to returns to
when you touch [Auto] on the screen for
[Exposure], [Spot Meter], etc.



[Exposure]
auto ( )
[Exposure]
manual ( )
Full manual