Sony PCV-RS423P - Manual (Page 88)

Replacing the lithium battery (PCV-RS410 series model)
Remove the old battery and install the new battery with the plus (+) side up.
8. Replace the cover. See Replacing the cover .
The values stored in the CMOS memory are now reset to the factory default values. Run the Setup utility to reset the date,
time, passwords, and other changes you may have made to the BIOS settings. If you do not wish to customize your BIOS
settings, do not run the Setup utility.
Dispose of the lithium battery properly. In some areas, the disposal of lithium batteries in household or
business trash may be prohibited. You can return your unwanted lithium batteries to your nearest Sony Service
Center or Factory Service Center. To locate a Service Center near you, visit the Sony Online Support Web site at
http://www.sony.com/pcsupport .
Resetting the computer's date and time
1. Double-click on the time readout displayed in the Windows ® tasktray. The Date and Time Properties window
appears.
2. From the Date & Time tab, change the settings as desired. Click Apply, then click OK.
Page 88