Sony MCS1 - Manual (Page 30)

30 GB
MCS1(WW)_2-320-924-01(1)
Maintenance
Cleaning the cabinet
Wipe the outside of the drive with a soft,
dry cloth. To remove stubborn stains,
moisten the cloth with a mild, neutral
detergent. Do not use solvents, cleaning
alcohol, benzene or other substances that
may damage the finish.
Cleaning the disc
• Fingerprints and other contamination on
the disc surface can lead to reading
errors. Always keep the disc clean.
• To clean the disc, lightly wipe it from
the center outwards.
• To remove stubborn stains, lightly
moisten the cloth before wiping the
disc, and use a dry cloth afterwards.
• Do not use benzene, record cleaning
liquid, antistatic fluids or other
substances that may damage the surface
of the disc.
• Never use cleaners on an unused disc.
Use specific CD cleaners to take off
dust.
• You may not be able to write on the
discs if there are scratches or dust on the
unrecorded area. Be careful not to
damage the discs.
Notes on Handling
a “Memory Stick”
Media
• Do not touch the connector section or
allow metal objects to come into contact
with it.
• Use only the label designed for the
“Memory Stick” media to attach on its
label space.
• Attach a label only to the designated
labeling space.
• Keep the “Memory Stick” media in the
supplied storage case to carry or store.
• Do not bend, drop or apply a strong
shock to the “Memory Stick” media.
• Do not disassemble or modify the
“Memory Stick” media.
• Keep the “Memory Stick” media away
from water.
• Keep the “Memory Stick” media away
from a location subject to:
– extremely high temperature, for
example, in a car parked in the sun.
– direct sunlight.
– high humidity and corrosive
substances.
• In the following cases, data on the
“Memory Stick” media may be
damaged (erased):
– When the “Memory Stick” media is
removed or the MCS1 is turned off
while data is being read.
– When the “Memory Stick” media is
used in a location subject to static
electricity or electrical noise.