Sony TAV-L1 - Manual (Page 21)

W
a
tch
ing
TV
21 GB
Watching TV
1
Press 1 on the system to switch on the
system.
When the system is in standby mode (the 1
(standby) indicator on the system is red), press
"/1 on the remote to switch on the system.
2
Press DIGITAL to switch to digital mode
or ANALOG to switch to analogue mode.
The channels available vary depending on the
mode.
3
Press the number buttons or PROG
+/– to select a TV channel.
To select channel numbers 10 and above using the
number buttons, enter the second and third digits
within two seconds.
To select a digital channel using the Digital
Electronic Programme Guide (EPG), see page 23.
In digital mode
An information banner appears briefly. The
following icons may be indicated on the banner.
* Note that this button may not be available in some countries.
Additional operations
Watching TV
1
1
"/1
Number
buttons
DIGITAL*
ANALOG
PROG +/–
: Interactive service is available (MHEG Digital
Text)
: Interactive service (MHEG Digital Text) is
currently disabled
: Radio service
: Scrambled/Subscription service
: Multiple audio languages available
: Subtitles available
: Subtitles available for the hearing impaired
: Recommended minimum age for current
programme (from 4 to 18 years)
: Parental Lock
: Current programme is being recorded
To Do this
Turn off the system
temporarily
(Standby mode) Press "/1 on the remote.
Turn off the system
completely Press 1 on the system.
Adjust the volume Press 2 + (increase)
/– (decrease).
Continued