Samsung SC-D23-XAP - Manual (Page 43)

Advanced Recording
39 39
ENGLISH
● DEMONSTRATION
✤ Demonstration automatically shows you the major functions that are included with
your camcorder so that you may use them more easily.
✤ The DEMONSTRATION function may only be used in the CAMERA mode without
a tape inserted in the camcorder.
✤ The demonstration operates repeatedly until the DEMONSTRATION mode switched OFF.
1. Set the camcorder to CAMERA mode.
2. Press the MENU button.
■ The menu list will appear.
3. Turn the MENU DIAL to highlight INITIAL.
4. Select DEMONSTRATION from the submenu and press the ENTER button.
5. To activate the DEMONSTRATION, set DEMONSTRATION ON.
■ Press the menu button to quit the menu.
■ The demonstration will begin.
6. To end the DEMONSTRATION,
set the DEMONSTRATION to OFF.
Notes
■ The DEMONSTRATION function only works without a TAPE installed.
■ The DEMONSTRATION mode is automatically activated when the camcorder is left idle for
more than 10 minutes after switching to the CAMERA mode (no tape is inserted in the camcorder).
■ If you press other buttons (FADE, BLC, PHOTO, EASY) during the DEMONSTRATION mode,
the DEMONSTRATION stops temporarily and resumes 10 minutes later if you do not operate
any other functions.
■ While setting the NITE PIX to ON, the DEMONSTRATION function does not work.
CAM MODE
INITIAL CLOCK SET
WL. REMOTE
DEMO
CAMERA
A/V
MEMORY
VIEWER
CAM MODE
INITIAL SET
CLOCK SET
WL.REMOTE
DEMONSTRATION
00616B SCD23-SEA(28~57) 5/12/03 9:47 AM Page 39