Sony IPT-DS1 - Manual (Page 10)

5-GB
Preparing the intelligent pantilter
At the time of purchase, Base A is attached in the tilt arm.
When using the DSC-TX7/DSC-TX7C, you must replace the base and plate
beforehand.
Removing the base
Put your finger on the left side of the base and lift up.
Selecting a base and plate
Align with your camera to select a base and plate.
Camera Base Plate
DSC-TX1
A
a1
DSC-WX1 a2
DSC-TX7/
DSC-TX7C
B b1
Mounting the base
Attaching/Removing the plate
Refer to “Preparing the intelligent pantilter” in the operating instructions.