Sony CPF-IX001 - Manual (Page 30)

30 GB
Input method/Number of the characters
for security key
4 Enter a pre-shared key when you select
[WPA(TKIP)], [WPA(AES)], [WPA2(TKIP)],
or [WPA2(AES)] in 2.
Enter the pre-shared key for your wireless LAN
router.
The length of the key should be 8 to 64 characters.
If you input 64 characters, enter hexadecimal
numbers (0 to 9, A to F, a to f).
Input method/Number of the characters
for pre-shared key
5 Cancel the settings.
6 Click the button to confirm the set values.
If any of the set values is incorrect, a dialog box
appears.
Click [Setup] to show the set values. Correct them if
necessary.
Notes
• Use a security key or a pre-shared key that cannot be
easily guessed.
• Periodically change the security key and the pre-
shared key to ensure the network security.
Firmware update window
Update the firmware for the CPF-IX001.
1 The version of the current firmware is
displayed.
2 Select the firmware file you want to update.
Click [Browse] to show the dialog for selecting the
firmware.
3 Click the button to update.
When you click the button, the firmware
confirmation window appears.
If you select the right firmware, updating starts. The
CPF-IX001 restarts automatically when the update
is completed.
If you select an incorrect firmware, click [Retry]
and select the correct one.
Notes
• Do not restart the CPF-IX001, set it to the suspended
mode, or turn off the power while updating the
firmware.
• Check the following website for CPF-IX001
firmware updates;
USA:
http://esupport.sony.com/?ref=http%3A//
www.sony.com/index.php
Canada:
http://www.sony.ca/sonyca/view/english/warranty/
consumer_support.shtml
Europe:
http://support.sony-europe.com/main/main.asp?l=en
WEP 64bits WEP 128bits
Characters 5 (one-byte
alphanumerics
and/or symbols) 13 (one-byte
alphanumerics
and/or symbols)
Hexadecimal
numbers 10 (0 to 9, A to
F, a to f) 26 (0 to 9, A to
F, a to f)
Characters 8 to 63 (one-byte alphanumerics
and symbols)
Hexadecimal
numbers 64 (0 to 9, A to F, a to f)