AEG 7200 - Manual (Page 37)

Instructions for use
37
6. Replace the pump cover. Laterally insert
the webs on the cover into the guide
slots and securely screw on the cover in
a clockwise motion.
7. Close the emergency emptying hose and
place it in the holder.
8. Close the flap.
Carry Out an Emergency Emptying Operation
• When the washing machine no longer pumps off the washing solu-
tion, an emergency emptying operation must be carried out.
• When the washing machine is in a room where there is a frost risk, an
emergency emptying operation must be carried out when there is a
frost risk.
Also: Unscrew the intake hose from the water tap and lay it on the
floor. Empty the drainage hose.
1 Warning! Switch off the washing machine before carrying out an
emergency emptying operation and pull out the mains plug.
Caution! The washing solution running out of the emergency emptying
hose can be hot. Risk of scalding! Allow the washing solution to cool
down before carrying out emergency emptying.
0 1. Provide a flat collecting vessel to catch the washing solution as it runs
out.
2. Open the flap downwards in the right
part of the base panel and pull it off.
3. Remove the emergency emptying hose
from the holder.