AEG 7200 User Manual

Page 33

Instructions for use

Washing is not spun
sufficiently, excess wa-
ter is still visible in the
drum.

Error code

E20

ap-

pears

The RINSE (SPOE-

LEN, RINCAGE)
indicator flashes.

There is a kink in the outlet
hose.

Straighten the hose.

The maximum pump height
(outlet hose height 1m from
from the support surface of
the appliance) has been
exceeded.

Call Customer Service, who
have modification kits avail-
able as accessories for pump
heights over 1m.

The detergent solution pump
is clogged.

Switch off the appliance and
pull out the mains plug.

At the syphon coupling:
The syphon is clogged.

Clean the syphon.

The door does not open
while the appliance is
switched on.

The door is locked due to
high water level or high
temperature.

Wait till the programme has
finished, and the END
(EINDE, FIN) indicator light is
on.

However, if you still need to
open the door:
Set the programme selector
to OFF (UIT, ARRET); Turn the
programme selector to PUMP
OUT (POMPEN, VIDANGE).
Press the START/PAUSE
(START/PAUZE, MARCHE/
PAUSE) button.
When the water has been
pumped out, the door can be
opened.

Fault

Possible Cause

Remedy