Agilent Technologies U2751A - Manual (Page 51)

Service Information 4
U2751A User’s and Service Guide 35
Replaceable Parts
This section contains the information for ordering
replacement parts for your instrument. To order the parts,
please do the following.
• Contact your nearest Agilent Sales Office or Service
Center.
• Provide the part number for the relay.
• Provide the instrument model and serial number.
The part number of the replaceable part and its description
are shown in the table below.
Table 4-2 Part number and description of replaceable part
Part number Description
0490-1896 RELAY 2C 3 VDC-COIL 2A 30 VDC
C A U T I O N
Electrostatic Discharge (ESD) Precautions
Almost all electrical components can be damaged by electrostatic
discharge (ESD) during handling. The following guidelines will help
prevent ESD damage when servicing the instrument or any electronic
device.
• Disassemble the instruments in a static-free work area only.
• Use a conductive work area to dissipate static charge.
• Use a conductive wrist strap to dissipate static charge
accumulation.
• Minimize handling.
• Keep the replacement parts in original static-free packaging.
• Remove all plastics, styrofoams, vinyls, papers, and other
static-generating materials from the immediate work area.
• Use only antistatic solder extractor.