Agilent Technologies U2751A - Manual (Page 42)

26 U2751A User’s and Service Guide
2 Operation and Features
SCPI Commands for System-Related Tasks
The following examples show the SCPI commands for
performing certain system
-related tasks.
Example 4, Performing system -related tasks
-> *CLS ; *RST // Resets the switch to the
default power -on state.
This command can be
ignored if this operation is
not required.
-> *TST? // Executes the self -test.
<- +0 // Returns a +0 if the test
pass else it will return a
+1 if it fails.
-> SYST:ERR? // Returns the error number
and its corresponding
message string from the
error queue.
<- +0 , "No Error"