Agilent Technologies U2751A - Manual (Page 41)

Operation and Features 2
U2751A User’s and Service Guide 25
System-Related Operation
This section provides information on system -related topics
such as executing a self -test, performing self-calibration
routine, and reading error conditions.
Self-Test
To perform the self -test, proceed as follows.
Agilent Measurement Manager Operation
Ensure that the switch terminals are not connected to any
instrument. Turn on the U2751A. On the application panel,
select
Tools > Self-Test. This will perform a series of
communication tests on the module, which take a couple of
seconds to complete.
Error Conditions
Agilent Measurement Manager Operation
A message box will appear once an error occurs while
operating the U2751A using the Agilent Measurement
Manager.
N O T E
Do not connect any terminal block or cables prior to performing self-test
process.