beautypg.com

Precautions, Maintenance, Usage and storage locations – Sony VGP-UVC100 User Manual

Page 29: Operation, Lens, Cleaning the cabinet, Cleaning the lens

background image

11

GB

Precautions

Usage and storage
locations

Do not use or store this product in the
following locations. Doing so may
damage the camera.

• Locations subject to abnormally

high temperatures
During periods of hot weather or the
summer season, the temperature inside
closed vehicles becomes especially
high, and if the camera is left in such a
location, it may warp or be damaged.

• Locations subject to direct

sunlight or next to heating
appliances
The camera may warp or be damaged.

• Sandy locations, such as the

beach
Do not place the camera in a location
where sand may be present, such as the
beach or other sandy areas. Doing so
may damage the camera, and in some
cases, repair may not be possible.

• Do not point the lens at the sun.

This could cause burn-in or other lens
damage. Be careful when leaving the
camera next to a window or outdoors.

Operation

• Do not remove the camera’s USB cable

during operation. Doing so may cause
the camera to malfunction.

• Do not place any objects on top of the

camera.

• Avoid placing the camera in locations

subject to sudden temperature changes.
Do not use the camera immediately
after moving it from a cold location to a
warm location, or after the ambient
temperature has risen drastically.
Otherwise, condensation may occur
inside the camera. Let the camera stand
for a moment before using it.

• Do not turn around the camera forcedly.

Doing so, the malfunction might occur.

• Do not use the computer except the

specification.

• Do not allow water or objects to get

inside the camera. Do not open the
camera.

Lens

Do not touch the lens.

Maintenance

Cleaning the cabinet

Wipe the outside of the camera with a
soft, dry cloth. To remove stubborn stains,
moisten the cloth with a mild, neutral
detergent. Do not use solvents, cleaning
alcohol, benzine or other substances that
may damage the finish.

Cleaning the lens

Remove any dust from the front of the
lens using a blower brush or soft brush.