AMT Datasouth FASTMARK 4600 - Manual (Page 58)

58
Miscellaneous
If the host shows "Printer Time out"
1. Check if the communication cable (parallel or serial) is connected securely
to your parallel or serial port on the PC and to the connector on the printer
at the other end.
2. Check if the printer power is turned on.
If the data has been sent, but there is no output from the printer. Check the active
printer driver, and see if Seagull Driver for your Windows system and the label
printer has been selected.
Vertical streaks in the printout usually indicate a dirty or faulty print head. (Refer
to the following examples.) Clean the print head. If the problem persists, replace
the print head.