AMT Datasouth FASTMARK 4600 - Manual (Page 35)

35
Front Panel Set-up Menu
The Set-up menu is a list of printer features that affect the basic operation of the printer.
These are functions that may not normally be selected using software commands.
Value settings that are changed using the keypad are stored into memory and are
retained when power is cycled. Value settings that are changed using software
commands are temporary changes and are not retained when power is cycled.
LCD and Button functionality in Set-up mode
Set-up Mode
Buttons Function
PAUSE
Press PAUSE to take printer off- line with READY LED
blinking.
FEED + PAUSE
(release buttons) Enters into set-up mode and displays feature.
FEED + PAUSE
Press and hold down FEED button. Press PAUSE button
repeatedly to scroll to the next feature.
FEED + CANCEL
Press and hold down FEED button. Press CANCEL button
repeatedly to scroll to the previous feature.
CANCEL Pressing this key will select the displayed feature.
FEED + PAUSE
Press and hold down FEED button. Press PAUSE button
repeatedly to scroll to the next value.
CANCEL Pressing this key will select the displayed value.
PAUSE Press PAUSE twice to exit set-up mode and ready printer.
LCD Displayed Information
Below is an example of a typical displayed Feature.
Feature name: PRINT MODE (blinking when selected)
Feature Value: DIRECT THERMAL (chosen print mode)
Stored indicator: * (selected and saved)
PRINT MODE
DIRECT THERMAL
*