Troubleshooting – Karcher KM 100-100 R Bp Pack User Manual
Page 28
-
12
ƽ
Danger
Risk of injury! Before carrying out any tasks on the machine, set the main key to "0" and remove it. Press emergency-stop button.
Troubleshooting
Fault
Remedy
Appliance cannot be started
Sit on the driver seat, the seat contact switch gets activated
Release emergency-stop button
Set main switch to “1”
Check the fuses.
Check battery; charge it if required.
Inform Kärcher Customer Service.
Appliance moves only slowly
Check the position of the immobilizing brake
Inform Kärcher Customer Service.
Machine is not sweeping properly
Check roller brush and side brushes for wear, replace if necessary.
Check function of bulk waste flap
Check sealing strips for wear, adjust or replace as required
Check belts of sweeping drive.
Check vacuum pressure system to see it is leak-proof.
Inform Kärcher Customer Service.
Dust gathers in the machine
Empty waste container
Check suction fan drive belt
Check sealing cover on suction fan
Check dust filter, clean or replace
Check filter case seal
Close wet/dry flap
Check sealing strips for wear, adjust or replace as required
Inform Kärcher Customer Service.
Side brush does not turn
Check the fuse.
Inform Kärcher Customer Service.
Poor cleaning performance at edges Replace side brush
Check sealing strips for wear, adjust or replace as required
Inform Kärcher Customer Service.
Side brush or roller brush switch-on
operation is not working
Check vacuum pressure system to see it is leak-proof.
Inform Kärcher Customer Service.
Insufficient vacuum performance
Check filter case seal
Check sealing cover on suction fan
Check hoses of suction blower for absence of leakness.
Insert lamella filter correct; see Changing dust filter
Inform Kärcher Customer Service.
Roller brush does not turn.
Remove belts or cords from roller brush
Inform Kärcher Customer Service.
28
EN