Ferguson D-580 - Manual (Page 30)

24
ENGLISH
Switching the YUV/RGB
This setting allows you to toggle the
output of the video signal between RGB
(on scart) and Component(YUV).
A
In ‘Video Setup Page’, use   keys to
highlight {COMPONENT}, then press .
YUV - Select this for Y Pb Pr connection
SCART - Select this for SCART RGB con-
nection
S-Video - Select this for S-Video (S-VHS)
connection
B
Use   keys to press OK to confirm
your selection.
Warning:
When the player is set to Y Pb Pr (YUV),
some TV may not properly synchronise
with player on the SCART connector.
HDMI Setup
The options included in HDMI Setup is :
‘Resolution’.
A
In {VIDEO SETUP PAGE}, press  to
highlight{HDMI Setup}, then press .
B
Press  to highlight an option.
C
Enter its submenu by pressing  .
D
Pressto select a setting, then press
OK to confirm your selection.
Resolution
You can select the resolution of the
picture according to your preference and
the connected HDMI TV.
480p: Progressive output in 480 lines for
NTSC TV.
576p: Progressive output in 576 lines for
PAL TV.
720p: Progressive output upscale to 720
lines.
1080i: Interlaced output upscale to 1080
lines.
1080p: Progressive output upscale to
1080 lines.
Auto: Output automatically based on
your display’s supported resolution.
Helpful Hint:
- If not display appears on the TV screen
due to unsupported resolution, reconnect
any available interlace video output to
your display and re-adjust the resolution
settings to 480p/576p.
- Select AUTO to automatically display the
best resolutions settings.
DVD Setup Menu Options