elektraLite 1018 RGBWA (5-in-1) - Manual (Page 15)

DMX Channel Assignments (Cont.)
9 (cont) PR04 (Programmable Automatic program 04) 191-200
PR05 (Programmable Automatic program 05) 201-210
PR06 (Programmable Automatic program 06) 211-220
PR07 (Programmable Automatic program 07) 221-230
PR08 (Programmable Automatic program 08) 231-240
PR09 (Programmable Automatic program 09) 241-250
PR10 (Programmable Automatic program 09) 251-255
10 Crossfade time for AT01-AT10 on channel 08 000-255
11 Dim 00 (straight line dimmer) 000-009
Dim 01 (dimmer curve 1. Shortest fade time) 010-069
Dim 02 (dimmer curve 2. 2 nd Shortest fade time) 070-129
Dim 03 (dimmer curve 3. 3 rd Shortest fade time) 130-189
Dim 04 (dimmer curve 4. Longest fade time) 190-255
12 All fixtures are address 000
ID 01 through 255 correspond to dmx addresses 001 through 255 respectively 001-255
18. Cleaning and maintenance.
Now ignoring maintenance and cleaning is very good way of creating problems "down the road" and
many companies and installations do just that. However the net result is, no matter what the fixture,
premature failure!
Changing the oil in a car most people do on a regular basis.
So with the fixtures regular maintenance it an excellent practice, if you want the fixtures to last.
So what is the maintenance for the fixture?
Clean the fan! That’s really it!
Turn off the Elektralite 1018(5-in-1).
Using a small vacuum cleaner, suck the dust and “fur balls” out.
Do not use a can of co². That will just blast the dust and dirt everywhere!
The fan keeps the LEDs cool and keep the electronics cool too.
Without the fan working efficiently and dust free, the fixtures will fail and that will be a lot more costly
than having someone vacuum the fixtures on a regular basis.
How often should the fan be cleaned? It depends on where the fixtures are; in a very dusty atmosphere
once a week. So check the fan on a regular basis, it may not need cleaned every week but a quick
“visual inspection” should be done.
The clear front plastic cover for the lenses should be cleaned so the light output is maintained. With the
Elektralite 1018 (5-in-1) turned off, use only a moist lint-free cloth, and clean the plastic cover. Never
use alcohol or solvents to clean the fixture. Never spray anything onto the fixture at the front or in any
place on the fixture.