elektraLite Cool White Dazer - Manual (Page 7)

12. SET. (Set has several Sub Menus which allow functions to be used).
1). REST
This resets all values to their default.
Using the Menu button, go through the Root Menu until SET. Press Enter and then use the ↑ or ↓
buttons to get to REST. Press Enter. The display will have 4 dots across the bottom. The password
needs to be entered. The password is the following sequence using the ↑ and ↓ buttons.
↑ ↓ ↑ ↓ then press Enter once, to complete the reset. The display will read "OK" followed by a
return to the REST sub menu. The Menu button will need pressing to return to the Root Menu. Only
when at the Root Menu will dmx control work. Please note the Reset also takes the dmx address back
to 001.
2). DIM
The Dim function allows different Dimmer curves to be chosen. There are 5 choices.
Choice 1 :- this is Dim off. The Dimmer curve is 0 which means any change in dimmer level is
instantaneous.
Choice 2:- Dim 1. The dimmer curve has the shortest fade in and fade out time.
Choice 3:- Dim 2. The dimmer curve has the 2
nd shortest fade in and fade out time.
Choice 4:- Dim 3. The dimmer curve has the 3 rd shortest fade in and fade out time
Choice 5:- Dim 4. The dimmer curve has the longest fade in and the fade out time.
Using the Menu button, go through the Root Menu until Set. Press Enter and then use the ↑ or ↓
buttons to get to DIM.
Press Enter and then use the ↑ or ↓ buttons to get to the DIM choice required. Once chosen, press
Enter to save it and then use the Menu button to exit back to the root directory.
3).DV
The DV setting allows the ability of the leds to not flicker when using video camera.
The choices are NTSC or PAL. NTSC is the USA system.
Go through the Root Menu until Set. Press Enter and then use the ↑ or ↓ buttons to get to DV.
Press Enter and then use the ↑ or↓ buttons to get to either NTSC or PAL. Once chosen, press Enter to
save the setting and the Menu to exit back to the Root Menu.
13. KEY
The Key function is an access password for the fixture. The KEY can be turned OFF or ON which then
deactivates or activates the password.
To set the KEY go through the Root Menu until KEY, press Enter and use the ↑ or ↓ to set the KEY to
either OFF or ON. If the Key is turned ON then a password is required to go into sensitive Menus and
to change functions.
The password is ↑ ↓ ↑ ↓ (Up + Down + Up + Down)