elektraLite eyeBall QUAD 7x12w LEDs - Manual (Page 5)

6. Menus in the fixture.
Root Menu Sub Menu 1 Sub Menu 2
STAT (STATIC LOOK) RED 0-255
GREEN 0-255
BLUE 0-255
WHITE 0-255
STROBE 0-255
AUTO (AUTOMATIC) Red
Green
Blue
Yellow
Cyan
Purple
White
Effect #1
Effect #2
Effect #3
RUN DMX 512
SLAVE
ADDRESS ASSIGN DMX CHANNEL 1-512
ID address 1-255
PERSONALITY STAG(E)
ARC.1
ARC1.D
ARC2
AR2.D
AR2.S
HSV
SETTINGS DTV NTSC/PAL
RGB→White ON/OFF ***
DIMMER 000(OFF), 001, 002, 003 or 004
RESET Password required*
FAN OFF
AUTO
LOW
NORMAL
HIGH
OFF
KEY LOCK OFF **SEE BELOW
ON
*The Password for the reset is using the up and down buttons when in the reset menu. The screen will initially
display [ ]. The following needs to be pressed ↑↓↑↓↑↓ then press Enter. The screen will then display the
word "OK" for 2 seconds and the fixture will reset.
**The Pasword for Key Lock is the same as reset. If key lock is ON then everytime you power up the eye Ball the
Password is requested. The password must be put in the eye Ball display otherwise no changes can be made to
the operation of the eye Ball.
***RGB→White. If this feature is turned on the Output of the RGB and white can be adjusted for maximum output.
Normally the R, G, B, and W all default to maximum of 255 output. However this can be change for each of the
color components from a value of 128 up to 255.