elektraLite eyeBall QUAD 7x12w LEDs - Manual (Page 12)

DMX Channel Assignments (Cont.)
8 (cont) Effect #2 (This is a chase loop; the speed of which is controlled by ch9 & cross fade by ch10). 211-230
Effect #3 (This is a chase loop; the speed of which is controlled by ch9 & cross fade by ch10). 231-255
9 Auto Speed (Control for the effects #1, #2 & #3 on ch8). 000-255
10 Dim 00 (straight line dimmer) 000-050
Dim 01 (dimmer curve 1. Shortest fade time) 051-100
Dim 02 (dimmer curve 2. 2 nd Shortest fade time) 101-150
Dim 03 (dimmer curve 3. 3 rd Shortest fade time) 151-200
Dim 04 (dimmer curve 4. Longest fade time) 201-255
11 ID 01 thru ID 255 combined. 000
ID 01
ID
001
ID 02 002
ID 03 003
ID 04 004
ID 05 005
ID 06 through to ID255 follow DMX values 006 to 255 006-255
18. Cleaning and maintenance.
Now ignoring maintenance and cleaning is very good way of creating problems "down the road" and
many companies and installations do just that. However the net result is, no matter what the fixture,
premature failure!
Changing the oil in a car most people do on a regular basis.
So with the fixtures regular maintenance it an excellent practice, if you want the fixtures to last.
So what is the maintenance for the fixture?
Clean the fans! That’s really it!
Turn off the Elektralite eyeBall.
Using a small vacuum cleaner, suck the dust and “fur balls” out.
Do not use a can of co². That will just blast the dust and dirt everywhere!
The fan keeps the LEDs cool and keep the electronics cool too.
Without the fan working efficiently and dust free, the fixtures will fail and that will be a lot more costly
than having someone vacuum the fixtures on a regular basis.
How often should the fan be cleaned? It depends on where the fixtures are; in a very dusty atmosphere
once a week. So check the fan on a regular basis, it may not need cleaned every week but a quick
“visual inspection” should be done.
The clear front plastic cover for the lenses should be cleaned so the light output is maintained. With the
Elektralite eyeBall
turned off, use only a moist lint-free cloth, and clean the plastic cover. Never use
alcohol or solvents to clean the fixture. Never spray anything onto the fixture at the front or in any place
on the fixture.
19. Technical Specification.
 Operating voltage 100 – 250v
 Frequency 50 – 60 Hertz
 7 x quad 10watt leds
 80 VI
 Fan cooled
 162.5mm x 162.5mm x 218.5mm
 6.5" x 6.5" x 8.6"
 2.1 kgs
 4.6 pounds
Elektralite is a division of Group One. Group One and its divisions are constantly improving
their product range and we reserve the right to make changes without prior notice.