Nikon S8200 - Manual (Page 37)

21
Step 1 Turn the Camera On
Th
e
Bas
ics of Shoo
ting and
Pl
ay
b
ack
Turning the Camera On and Off
• The power-on lamp will light in green briefly then turn off, and then the monitor
will turn on.
• To turn off the camera, press the power switch. When the camera turns off, the
power-on lamp and the display turn off.
• To turn on the camera and switch to playback mode, press and hold the
c
(playback) button. The lens will not extend.
C
Power Saving Function (Auto Off)
If no operations are performed for a while, the monitor will turn off, the camera will enter standby
mode, and the power-on lamp will blink. If no operations are performed for another three minutes,
the camera will turn off automatically.
You can turn the monitor back on while the camera is in standby mode by performing any of the
following:
➝ Press the power switch, shutter-release button, c (playback) button, or b (e movie-record)
button.
➝ Rotate the mode dial.
• The time that elapses before the camera enters standby mode can be changed using the Auto off
setting in the setup menu ( A 94).
• By default, the camera enters standby mode in about one minute when you are using shooting
mode or playback mode.
• If you are using the optional AC Adapter EH-62F, the camera enters standby mode after 30
minutes.
8 4 0 8 4 0
2 9 m 0 s 2 9 m 0 s
Blinks
No operations
performed
No operations
performed
3 min
Camera enters
standby mode.
Camera turns off.