Nikon D610 - Manual (Page 345)

319
n
Shooting (P, S, A, M)
Shutter-release disabled :
• Non-CPU lens is attached: rotate camera mode dial to A or M ( 0 288).
• Mode dial rotated to S after shutter speed of A selected in mode M: choose new shutter
speed ( 0 76).
Full range of shutter speeds not available : Flash in use. Flash sync speed can be selected using
Custom Setting e1 (Flash sync speed); when using compatible flash units, choose 1/250 s
(Auto FP) or 1/200 s (Auto FP) for full range of shutter speeds (
0 234).
Colors are unnatural :
• Adjust white balance to match light source ( 0 115).
• Adjust Set Picture Control settings ( 0 129).
Can not measure white balance : Subject is too dark or too bright ( 0 123).
Image can not be selected as source for preset white balance : Image was not created with D610 ( 0 124).
White balance bracketing unavailable :
• NEF (RAW) or NEF+JPEG image quality option selected for image quality ( 0 93).
• Multiple exposure mode is in effect ( 0 163).
Effects of Picture Control differ from image to image : A (auto) is selected for sharpening, contrast, or
saturation. For consistent results over a series of photos, choose another setting ( 0 132).
Metering can not be changed : Autoexposure lock or movie live view is in effect ( 0 57, 110).
Exposure compensation can not be used : Choose mode P, S, or A ( 0 75, 76, 77).
Noise (reddish areas or other artifacts) appears in long time-exposures : Enable long exposure noise
reduction ( 0 218).