Nikon D610 - Manual (Page 118)

92
d
❚❚Camera Controls
1
Assign image area selection to a camera control.
Select Choose image area for a camera control in the Custom Settings menu
(
0 219). Image area selection can be assigned to the Fn button (Custom Setting
f2, Assign Fn button, 0 242) or the depth-of-field preview button (Custom
Setting f3, Assign preview button, 0 244).
2
Use the selected control to choose an image area.
The image area can be selected by pressing the
selected button and rotating the main or sub-
command dial until the desired crop is
displayed in the viewfinder (
0 90).
The option currently selected for image area can
be viewed by pressing the button to display the
image area in the control panel, viewfinder, or
information display. FX format is displayed as
“36 – 24” and DX format as “24 – 16”.
D
Auto DX Crop
The selected control can not be used to select image area when a DX lens is attached and
Auto DX crop is on.
A
Image Size
Image size varies with the option selected for image area ( 0 95).
Main command
dial
Fn button