Nikon D810 User Manual

Page 502

478

ADL bracketing

2 frames using selected value for one frame or 3–

5 frames using preset values for all frames

Exposure lock

Luminosity locked at detected value with A AE-L/
AF-L

button

ISO sensitivity
(Recommended
Exposure Index)

ISO 64 – 12800 in steps of

, or 1 EV. Can also

be set to approx. 0.3, 0.5, 0.7, or 1 EV (ISO 32
equivalent) below ISO 64 or to approx. 0.3, 0.5, 0.7,
1, or 2 EV (ISO 51200 equivalent) above ISO 12800;
auto ISO sensitivity control available

Active D-Lighting

Can be selected from Auto, Extra high, High,

Normal, Low, or Off

Focus

Autofocus

Nikon Advanced Multi-CAM 3500FX autofocus
sensor module with TTL phase detection, fine-
tuning, 51 focus points (including 15 cross-type
sensors; f/8 supported by 11 sensors), and
AF-assist illuminator (range approx. 0.5–3 m/1 ft
8 in.–9 ft 10 in.)

Detection range

–2 – +19 EV (ISO 100, 20 °C/68 °F)

Lens servo

• Autofocus (AF): Single-servo AF (AF-S); continuous-

servo AF (AF-C); predictive focus tracking
automatically activated according to subject
status

• Manual focus (M): Electronic rangefinder can be

used

Focus point

Can be selected from 51 or 11 focus points

AF-area mode

Single-point AF, 9-, 21-, or 51- point dynamic-area
AF, 3D-tracking, group-area AF, auto-area AF

Focus lock

Focus can be locked by pressing shutter-release
button halfway (single-servo AF) or by pressing
A AE-L/AF-L button

Exposure