Nikon D810 - Manual (Page 455)

431
1 Not available with spot metering.
2 Can also be selected with flash unit.
3 AA/A mode selection performed on flash unit using custom settings. Unless lens data have
been provided using the
Non-CPU lens data option in the setup menu, “A” will be
selected when a non-CPU lens is used.
4 Can only be selected with camera.
5 Available only during close-up photography.
6 Unless lens data have been provided using the
Non-CPU lens data option in the setup
menu, non-TTL auto (A) is used with non-CPU lenses, regardless of mode selected with flash
unit.
7 Available only in i-TTL, AA, A, GN, and M flash-control modes.
8 Availalbe only in i-TTL, AA, and A flash-control modes.
9 Available only in commander mode.
10 Firmware updates for the SB-910 and SB-900 can be performed from the camera.
Color Information Communication z z z — — z z
Auto FP High-Speed Sync 7 z z z z z — —
FV lock 8 z z z z z z z
AF-assist for multi-area AF z z z z 9 — — —
Red-eye reduction
z z z
— —
z
—
Camera modeling illumination
z z z z z
— —
Camera flash mode selection — — — — —
z z
Camera flash unit firmware update
z 10 z
— — — —
z
SB-9
10, SB-9
00,
SB
-8
00
SB
-7
00
SB
-6
00
SU
-8
00
SB
-R
20
0
SB
-4
00
SB
-3
00