Nikon D5000 - Manual (Page 87)

69
z
D
Before Using the Remote Control
Before using the remote control for the first time, remove the clear plastic battery insulator
sheet.
D
Using the Built-in Flash
Before taking a photograph with the flash in P, S, A, M, or 0 modes, press the M button to raise
the flash and wait for the M indicator to be displayed in the viewfinder (0 70). Shooting will
be interrupted if the flash is raised after the self-timer or delayed remote timer has started.
In auto or scene modes in which the flash pops up automatically, the flash will begin
charging when delayed remote or quick-response remote mode is selected; once the flash is
charged, it will automatically pop up and fire if required when the shutter-release button on
the ML-L3 is pressed. The camera will only respond to the shutter-release button on the
ML-L3 once the flash has charged. Only one photograph will be taken when the flash is used,
regardless of the number of shots selected for Custom Setting c3 (Self-timer, 0 157).
In flash modes that support red-eye reduction, the red-eye reduction lamp will light for
about one second before the shutter is released. In delayed remote mode, the self-timer
lamp will light for two seconds, followed by the red-eye reduction lamp, which lights for one
second before the shutter is released to reduce red-eye.
A
The E Button
Self-timer mode can also be selected by pressing the
E button (0 163).
A
See Also
For information on changing the duration of the self-timer and choosing the number of
shots taken, see Custom Setting c3 (Self-timer, 0 157). For information on choosing the
length of time the camera will remain in standby mode before remote control mode is
cancelled, see Custom Setting c4 (Remote on duration, 0 157). For information on
controlling the beeps that sound when the self-timer and remote control are used, see
Custom Setting d1 (Beep, 0 158).
E button