Release mode – Nikon D5000 User Manual
Page 83

65
z
Release Mode
Release mode determines how the camera takes photographs: one at a time, in a
continuous sequence, with a timed shutter-release delay or remote control, or with
reduced camera noise.
1
Place the cursor in the information display.
If shooting information is not displayed in the monitor, press the
R button.
Press the
P button to place the cursor in the information display.
2
Display release mode options.
Highlight the current release mode in the
information display and press
J.
3
Choose a release mode.
Highlight one of the following options and press
J.
R button
Information display
P button
Mode
Description
8 Single frame
Camera takes one photograph each time shutter-release button is
pressed.
I Continuous
Camera records about 4 frames per second while shutter-release
button is held down.
E Self-timer
Use for self-portraits or to reduce blurring caused by camera shake
(0 67).
" Delayed remote
Optional ML-L3 wireless remote control required. Shutter is
released after two-second delay (0 67).
#
Quick-response
remote
Optional ML-L3 wireless remote control required. Shutter is
released immediately (0 67).
v
Quiet shutter-
release
As for
8 (single frame) except that camera makes no sound until
finger is removed from shutter-release button after shooting and
beep does not sound when camera focuses, keeping noise to a
minimum in quiet surroundings.