Troubleshooting, Display, settings and power supply – Nikon S3300 User Manual
Page 187
F
7
Te
chni
cal
Note
s and
In
de
x
Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service representative.
Display, Settings and Power Supply
Problem
Cause/Solution
A
Battery inserted into the
camera cannot be charged.
• Confirm all connections.
• Off is selected for Charge by computer in
the setup menu.
• When charging by connecting the camera to
a computer, battery charging stops when
the camera is turned off.
• When charging by connecting the camera to
a computer, battery charging stops if the
computer is suspended (sleeping), and the
camera may turn off.
• Depending upon computer specifications,
settings, and status, it may be impossible to
charge the battery inserted into the camera
via computer connection.
–
The camera cannot be
turned on.
• Battery is exhausted.
• When connecting to an electrical outlet
using a Charging AC Adapter, the camera
cannot be turned on.
The camera turns off
without warning.
• Battery is exhausted.
• The camera automatically turns off to save
power if no operations are performed for an
extended period of time.
• The camera and battery may not work
properly at low temperatures.
• The camera turns off if the Charging AC
Adapter is connected while the camera is on.
• The USB cable connecting the camera to the
computer or printer has been disconnected.
Reconnect the USB cable.
• The internal temperature of the camera or
the memory card is high. Leave the camera
off until it has cooled and then turn it on
again.
–