Nikon D4 - Manual (Page 53)

En_01
39
10
Enter the following information and click Next.
• Network name: Enter the name of the network on which the
host computer or ftp server is located.
• Communication mode: Select Infrastructure or Ad hoc.
• Channel: Select a channel (ad hoc only; in infrastructure
mode, the WT-5 will choose the channel automatically). Note
that if a matching SSID is found on a different channel, the
WT-5 may change the channel automatically.
• Authentication: The authentication used on the network.
Choose from open system, shared key, WPA-PSK, and WPA2-
PSK (infrastructure) or open system and shared key (ad hoc).
• Encryption: The encryption used on the network. The options
available depend on the authentication used.
Open : None; 64- or 128-bit WEP
WPA-PSK : TKIP; AES
Shared : 64- or 128-bit WEP
WPA2-PSK : AES
• Encryption key: If the network uses encryption, enter the
network key. The number of characters required depends on
the type of key used:
WEP (64-bit) WEP (128-bit) TKIP, AES
Number of characters (ASCII) 5 13 8–63
Number of characters (hex) 10 26 64