Nikon D4 - Manual (Page 20)

10
St
ep 2: Enabling
the Ethernet
Step 2: Enabling the Ethernet
Select the Ethernet as the network device used by the camera.
1
Display the hardware list.
In the setup menu, select Network, then
highlight Choose hardware and press
2
to view the hardware list.
2
Select Wired LAN.
Highlight Wired LAN and press J to
select the highlighted option and return
to the network menu.
Step 3: The Connection Wizard
Follow the on-screen instructions to create a network profile.
1
Display network profiles.
In the network menu, highlight Network
settings and press
2 to display the
profiles list and other network settings.
2
Select Create profile.
Highlight Create profile and press 2.
Note that if the list already contains nine
profiles, you will need to delete an
existing profile using the
O (Q) button
before proceeding ( 053).