Nikon D4 - Manual (Page 19)

9
St
ep 1:
C
o
nnec
tin
g an E
thern
et C
a
b
le
3
Turn the camera on.
Rotate the power switch to turn the
camera on.
A
Connection Status
Connection status is shown by the LEDs next to
the camera’s Ethernet connector.
A
The Viewfinder Display
Connection status is also shown in the camera
viewfinder.
T is displayed when the camera is
connected via Ethernet, U when it is
connected to a wireless network, and a flashing
when an error has occurred.
Power switch
LEDs
Green LED Yellow LED Status
●
(off )
●
(off )
Network functions disabled ( 051) or Ethernet
cable not connected.
K
(on)
●
(off )
Waiting to connect.
K
(on)
K
(on)
Connecting.
K
(on)
H
(flashes)
Connected.
H
(flashes)
H
(flashes)
Error.