Nikon D4S - Manual (Page 30)

20
3
Select Enable.
Highlight Enable and press J to
connect to the network and return to
the network menu.
The profile name will be displayed in
green when a connection is established.
4
Start Camera Control Pro 2.
Start the copy of Camera Control Pro 2 (available separately)
installed on the host computer. For information on using
Camera Control Pro 2, see the Camera Control Pro 2 manual
(pdf ).
A
Firewall Settings
Image transfer and camera control modes use TCP port 15740 and UDP port
5353. Computer firewalls must be configured to allow access to these ports,
as otherwise the computer may not be able to access the camera.
A
Ethernet Networks
Do not disconnect the Ethernet cable while the camera is on.
D
Wireless Networks
Operations may take longer on wireless networks. If the signal is disrupted
while pictures are being transferred to Camera Control Pro 2, the LED on the
WT-5 will flash yellow; disable and re-enable the network connection
(
051). Transfer will resume when the connection is re-established. Note
that transfer can not be resumed if you turn the camera off before transfer is
complete.