Nikon S6800 User Manual
Page 217
F
9
T
e
c
hni
cal
No
te
s an
d
In
d
e
x
Date and time of recording
are not correct.
• If the camera clock has not been set, the “Date not
set” indicator flashes during shooting and movie
recording. Images and movies saved before the
clock is set are dated “00/00/0000 00:00” and “01/
01/2014 00:00” respectively. Set the correct time
and date for Time zone and date in the setup
menu.
• The camera clock is not as accurate as ordinary
watches or clocks. Periodically compare the time of
the camera clock with that of a more accurate
timepiece, and reset as required.
No indicators displayed in
monitor.
Hide info is selected for Photo info in Monitor
settings in the setup menu.
Print date not available.
Time zone and date has not been set in the setup
menu.
Date not imprinted on
images even when Print
date is enabled.
• The current shooting mode does not support Print
date.
• The date cannot be imprinted on movies.
Screen for setting time zone
and date is displayed when
the camera is turned on.
The clock battery is exhausted; all settings were
restored to their default values.
The camera settings reset.
The camera becomes hot.
The camera may become hot when used for an
extended period of time to shoot movies or send
images using an Eye-Fi card, or when used in a hot
environment; this is not a malfunction.
–
The camera makes sound.
When Autofocus mode is set to Full-time AF or
while in some shooting modes, the camera may
produce an audible focusing sound.
Problem
Cause/Solution
A